Technical Data
Product Information
DAA
PDR PRO-II Competition Holster for Pistol with Red Dot Optic (RDO)
Simply built and made for a fast draw: the unlined Kydex shell, formed for your pistol, has a lowered front cut-out for a quick clearance. The aluminium rail with ball-joint belt hanger keeps the gun close to the body, and the height can be adjusted without dismantling the holster.
The DAA PDR PRO-II is a closed-body Kydex competition holster with a firearm-specific unlined shell and adjustable belt mounting. Its PRO-II aluminium rail, ball joint and adjustable retention provide a repeatable position for sporting use.
PRO-II hanger: The aluminium rail runs parallel to the pistol slide. Height can be adjusted without dismantling the holster. With its spacers the hanger fits belts 1.5–2.0 in (3.81–5.08 cm) wide.
Firearm-specific shell: The unlined shell is formed for the selected firearm family. A lowered inner flap eases access to the grip, and the lower front cut-out supports a fast clearance. Draw resistance is tuned with the thumb screw.
Selection and safety: Select the exact firearm model and handedness, and observe the DAA compatibility chart. The S&W M&P 2.0 Competitor is not supported.
Double-Alpha Academy (DAA) from Waalwijk in the Netherlands has its roots in practical shooting: it started in 2002 as an IPSC school and has been developing its own competition equipment since the late 2000s. The PDR PRO-II (PDR stands for "Production Division Ready") was created in response to the growing popularity of closed-body Kydex holsters among IPSC and USPSA shooters. According to DAA it is continually updated based on customer feedback and has been one of the manufacturer's most popular and popular holsters for years.
- Firearm-specific Kydex shell
High-quality Kydex, folded to tight tolerances and shaped specifically for each gun. According to DAA the thinner material gives a more precise fit.
- Unlined shell
The slick, unlined shell is a long-standing feature of this holster.
- Lowered inner flap
The lowered high inner flap allows a better grip on the gun.
- Lowered front cut-out
The lower cut-out at the front supports a quicker draw.
- Aluminium rail, parallel mounting
The rail was upgraded from plastic to aluminium. The parallel attachment brings the gun closer to the body.
- Height adjustment without dismantling
A set screw in the ball joint allows precise height adjustment without taking the holster apart.
- For belts from 1.5 to 2.0 in
With the included spacers the hanger fits belts from 1.5 to 2.0 in (3.81 to 5.08 cm) wide.
- Adjustable draw resistance
A thumb screw, modified tension spacers and slim-line retention bars determine how firmly the gun is held.
- Carry method
Competition holster worn on the belt (ball-joint belt hanger with aluminium rail).
Material and craftsmanship
Firearm-specific shell made of high-quality Kydex, rail made of aluminium. Standard finish is black; DAA lists a Hydrodip version as a separate item.
Available configurations
Compatible firearm models
Glock
- 17Gen 1
- 19Gen 2
- 22Gen 2
- 23Gen 2
- 29
- 31
- 32
- 34Gen 3
- 35Gen 3
- 37
- 38
- 41
- 45Gen 5
Sig Sauer
- 1911 Max
- P226
- P226 X5
- P226 X6
- P228
- P320
- P320 RX
- P320 X5
- P320 X5 Legion
- P320 X-Carry
- P320 X-Vtac
Tanfoglio
- Limited
- Limited Custom
- Limited Custom Extreme
- Stock I
- Stock II
- Stock II Extreme
- Stock III
- Stock III Extreme
- Stock III P
STI
- DVC 3-Gun
- DVC 2011
- DVC Carry
- DVC Limited
- DVC Omni
- Edge
- Tactical
CZ
- 75 SP-01
- Custom Shadow 2
- Shadow 2
- TS 2
Smith & Wesson
- M&P4¼" · 5"
- M&P 2.04¼" · 5"
- Performance Center C.o.r.e.
- Performance Center M&P4¼"
Springfield Armory
- XDM3.8" · 4½" · 5¼"
- XDM Compact3.8"
Walther
- PDP Match SF
- PDP Match Steel Frame
BUL Armory
- 1911
Canik
- TP9
Grand Power
- X-Calibur
Heckler & Koch
- USP
Rock Island Armory
- 1911
Staccato
- C
Further models (maker not assigned)
- 1911 GOVERNMENT
Scope of delivery
- PDR PRO-II holster with firearm-specific Kydex shell in the selected hand version
- Aluminium rail with ball-joint belt hanger
- Spacers for belts 1.5 to 2.0 in wide
- Thumb screw for draw resistance
Notes
- Available for right- and left-handed use; the exact firearm model and hand must be selected.
- The S&W M&P 2.0 Competitor does not fit the M&P versions.
- According to the DAA compatibility list some fitting may be needed on 1911 Government pistols depending on the maker; for the H&K VP9 the Kydex must be moulded.
- Adjust and test the fit only with an unloaded firearm; check retention, screws and belt hanger regularly.
* Firearms, optics, magazines, ammunition and accessories shown are not included unless expressly stated. The selected article variant applies.
DAA
