Technical Data
Product Information
| Item information | Value |
|---|---|
| HAN: | DAA-RACER-POUCH-MAG |
| Category: | Magazine Holders / Pouches |
DAA
Racer Magazine Pouch with Magnet
The proven Racer magazine pouch, now with the large magnet mounted directly on the body. This is made possible by the centre rotation screw, which locks firmly and does not come loose or lose its setting. The manufacturer stresses that the clean draw of the magazine from the pouch is not affected.
This version combines the DAA Racer magazine pouch with a magnet mounted on the body.
The Racer base can be mounted on either side and at 90 degrees. Three insert sets and an additional spacer cover common 2011, CZ/Tanfoglio, Glock and M&P magazines.
Compatibility: Fits 1.5 in (3.81 cm) belts, not 1.75 in (4.45 cm) belts. Does not fit large-frame Glock magazines such as G20/G21 or.45 H&K magazines.
Double-Alpha Academy from Waalwijk develops its equipment from the practice of IPSC and USPSA. On the magnet version of the Racer the large DAA magnet sits directly on the pouch body – the result of a longer development.
- Magnet on the pouch body
An M5 thermal brass insert seated deeply in the plastic provides about 6 mm of thread for the magnet screw.
- Firmly locking centre screw
The centre rotation screw locks firmly and does not come loose, which allows the magnet to be attached with confidence.
- Interchangeable inserts for common magazines
Interchangeable inserts for 2011, CZ/Tanfoglio, Glock and M&P magazines.
- For right- and left-handed shooters
Can be mounted left or right, including at 90 degrees.
- Adjustable tilt
Angle adjustable to personal preference, secured by a locking mechanism.
- Minimalist belt hanger
Prevents the inner and outer belt from separating.
Material and craftsmanship
Sturdy moulded plastic body with an inserted M5 brass thread insert for the magnet.
Available configurations
Scope of delivery
- Racer magazine pouch with magnet (per the manufacturer's description including screw and thread insert)
- 3 sets of interchangeable inserts
- Third pressure spacer for Glock and M&P magazines
- Allen keys
- Conversion screw set for 90-degree/outward-facing mounting
- Instruction manual
Notes
- Fits 1.5 in (3.81 cm) belt systems; not compatible with 1.75 in (4.45 cm) belts such as Safariland's.
- Not suitable for large-frame Glock magazines (e.g. G20/G21) or.45 HK magazines.
- The magnet, screw and thread insert can also be ordered separately to retrofit an existing Racer; some DIY work is required.
* Firearms, optics, magazines, ammunition and accessories shown are not included unless expressly stated. The selected article variant applies.
DAA
