4 MOA
Red dot of 4 MOA (3.25 MOA): the smaller of the two dot sizes covers less of the target.
Technical Data
Reflex sight · side battery drawer
SHIELD RMSd Reflex Mini Sight D
Compact aluminium reflex sight with a glass lens and a side-accessible battery drawer for changing the battery without removing the sight, 18.5 g without battery.
CR1632 · 9,000 hBattery · runtime
AluminiumHousing
SideBattery drawer
18.5 g without batteryWeight
Versions
The dot is available as 4 MOA (3.25 MOA) or 8 MOA (6.5 MOA), as Shield specifies the dot sizes. Only the selected version is supplied.
Features in practical use
Co-witness on many Glock models
The low-profile design allows co-witnessing with the standard sights on many Glock models; according to Shield, suppressor-height sights are not needed.
Crystal-clear glass lens
The D-shaped glass lens has an anti-reflective, colour-neutral hard coating; there is no filter in front of the image.
Automatic brightness
The sight adjusts its brightness itself and can therefore stay on permanently; the lowest level is night-vision compatible, the highest is visible against the sky in bright daylight.
Side battery drawer, CR1632
The CR1632 battery (3 V) gives 9,000 hours in average daylight according to Shield; the side-accessible drawer allows changing it without removing the sight.
Aluminium housing, SHIELD footprint
Machined from aerospace-grade aluminium and mounted on the SHIELD footprint (over 100 mounting solutions according to Shield); 40.8 x 25.35 x 22.8 mm, 18.5 g without battery.
IP67, 0.9 m water depth
Shield states the sight can be immersed to 0.9 m (3 ft) for 30 minutes (IP67).
Reticle
Reticles to choose from
Only the selected version is supplied.
Scope of delivery
- Sight in the selected version
- Mini dial for adjustment
- 1 CR1632 battery
- 1 x 1° shim for additional elevation range
- 2 button head screws M4x8 mm and 2 button head screws M4x10 mm
- 1 hex wrench 1.5 mm and 1 hex wrench 2.5 mm
- 4 nylon washers 0.5 mm
- 1 battery cover (Reece’s Law)
- 2 battery stickers
- 2 Shield target stickers
- RMSd sight cover
Matching items
Suitable mounts and adapter plates for the SHIELD footprint; Shield lists over 100 mounting solutions. The pistol and mount are not included; M4x8 and M4x10 mm screws and four nylon washers are supplied.
Warranty
Shield provides a limited lifetime warranty on materials and workmanship for the products it designs and manufactures, valid from the date of purchase. Statutory rights remain unaffected.
* Firearms, mounts and other accessories shown are not included unless expressly listed. The selected item variant and the described scope of delivery are decisive.
Reviews
Write the first review for this item and help others make a purchase decision!
