4 MOA
Red dot of 4 MOA (3.25 MOA): the smaller of the two dot sizes covers less of the target.
Technical Data
Compact reflex sight · SHIELD footprint
SHIELD SMSc Mini Sight Compact
Compact mini reflex sight made of glass-filled nylon polymer, only 23 mm wide and 10.3 g without battery, with a polymer or glass lens, 4 or 8 MOA, in black or FDE.
CR2032 · 20,000 hBattery · runtime
Nylon polymerHousing
23 mmWidth
10.3 g without batteryWeight
Versions
Available are a polymer lens with 4 or 8 MOA in black and a glass lens with 4 or 8 MOA in Flat Dark Earth (FDE). Shield specifies the dot sizes as 4 MOA (3.25 MOA) and 8 MOA (6.5 MOA). Only the selected version is supplied.
Features in practical use
Co-witness with standard iron sights
Thanks to the low frame and a rear iron sight notch, the weapon’s standard iron sights stay in view (co-witness).
Hard-coated acrylic lens
The D-shaped polymer lens is made of acrylic and carries an anti-reflective, colour-neutral hard coating; there is no filter in front of the image.
Automatic brightness
The sight adjusts its brightness itself and can therefore stay on permanently; the lowest level is night-vision compatible, the highest is visible against the sky in bright daylight.
CR2032, changed from underneath
A CR2032 lithium battery (3 V) gives 20,000 hours in average daylight according to Shield; it sits on the underside and the sight is removed to change it.
Slim polymer housing, SHIELD footprint
The glass-filled nylon polymer housing is only 23 mm wide and mounts to the SHIELD footprint (over 100 mounting solutions according to Shield); 40.8 x 23 x 22.8 mm, 10.3 g without battery.
IP67, 0.9 m water depth
Shield states the sight can be immersed to 0.9 m (3 ft) for 30 minutes (IP67).
Reticle
Reticles to choose from
Only the selected version is supplied.
Scope of delivery
- Sight in the selected version
- Mini dial for adjustment
- 1 CR2032 battery
- 1 x 1° shim for additional elevation range
- 2 button head screws M4x8 mm and 2 button head screws M4x10 mm
- 1 hex wrench 1.5 mm and 1 hex wrench 2.5 mm
- 4 nylon washers 0.5 mm
- 1 battery cover (Reece’s Law)
- 2 battery stickers
- 2 Shield target stickers
- SMSc sight cover
Matching items
Suitable mounts and adapter plates for the SHIELD footprint; Shield lists over 100 mounting solutions. Shield describes the SMSc as designed for everyday carry (EDC) and single-stack pistols. The pistol and mount are not included; M4x8 and M4x10 mm screws are supplied.
Warranty
Shield provides a limited lifetime warranty on materials and workmanship for the products it designs and manufactures, valid from the date of purchase. Statutory rights remain unaffected.
* Firearms, mounts and other accessories shown are not included unless expressly listed. The selected item variant and the described scope of delivery are decisive.
Reviews
Write the first review for this item and help others make a purchase decision!
