Technical Data
Magnifier · 3x · flip-to-side
Sightmark T-3 Magnifier 3x with LQD Flip-to-Side Mount
3x magnifier to mount directly behind a reflex or red dot sight, with a flip-to-side mount that swings to the side and a locking quick-detach lever.
Product
This product is the T-3 magnifier (SM19063) with 3x magnification. It is a magnifier, not a sight: it is mounted behind an existing reflex or red dot sight. The sight is not included.
Features in practical use
3x magnification
Fixed 3x magnification, 23 mm objective, 7.6 mm exit pupil; field of view 14.43 m at 100 m (43.3 ft at 100 yd).
Eye relief and diopter
Eye relief 57 mm (2.25 in); diopter adjustment from +3 to -3.
Flip-to-side mount
The mount swings to the right or left when the magnification is not needed; the side is set during mounting and the flip tension is adjustable.
Locking quick detach
The LQD lever with lock releases the Picatinny mount for quick removal; the clamping width can be adjusted with a nut on the side.
Reticle alignment
External elevation and windage adjustment (by hand, without clicks) centres the sight's reticle in the magnifier's field of view; the sight's point of impact does not change.
Housing
Aluminium, fully multi-coated, IP55 water resistant, recoil rated up to .308; 103 × 66.2 × 42.5 mm, 30 mm tube diameter.
Scope of delivery
- Flip-to-side LQD mount
- Adjustment tools
- Manual
Matching items
For use behind a reflex or red dot sight; Sightmark states the mount is compatible with EOTech® and Aimpoint® and provides for a Picatinny rail. The sight and the firearm are not included.
* Firearms, mounts and other accessories shown are not included unless expressly listed. The selected item variant and the described scope of delivery are decisive.
Sightmark
