Illuminated centre
The centre of the reticle is illuminated as a red horseshoe that is open at the bottom, with a centre dot.
Riflescope · second focal plane
Compact 1–10×24 riflescope with 30 mm main tube, an illuminated MSR BDC10 reticle in the second focal plane and a factory-installed ALPHA-MSR mount.

This version has the MSR BDC10 reticle in the second focal plane.
The illuminated MSR BDC10 reticle has 6 brightness settings, according to the manufacturer.
The reticle sits in the second focal plane and keeps its apparent size at every magnification.
According to the manufacturer the riflescope is only 8.4 in (212 mm) long.
The ALPHA-MSR mount is factory installed and pre-leveled.
The illumination dial has an off position between each brightness increment; the turrets are made of metal.
According to the manufacturer the broadband anti-reflection coating reduces surface reflections across the visible spectrum.
A removable throw lever and lay-flat flip-back lens covers are included.
The riflescope is waterproof, shockproof and fog-proof, according to the manufacturer.
Reticle design

The centre of the reticle is illuminated as a red horseshoe that is open at the bottom, with a centre dot.
Below the centre there is a grid of holdover points for bullet drop compensation (BDC). The manual states that its values apply at maximum magnification.
Small arrowheads to the left and right of the centre point to the middle.
Wide posts on the left, right and bottom frame the reticle at its edge.
The riflescope has a 30 mm main tube and comes with the compact MSR mount installed. If other rings or mounts are used, they must fit a 30 mm tube.
* Firearms, mounts and other accessories shown are not included unless they are expressly listed. The selected product variant and the described scope of delivery are decisive.
Add product directly to the cart:
You can search by item no. or EAN/GTIN to quickly add the product to the cart.

We help and advise you in all matters