Black
Colour Black.
Technical Data
Reflex sight · red dot
Sig Sauer ROMEO4T-PRO red dot sight 1x20 2 MOA Quad Ballistic Circle Dot
Tactical 1x20 red dot sight with four selectable reticles, top activation, NV override and two mounting heights for picatinny rails.
2 MOACentre dot
1x20 mmMagnification and aperture
193 g (6.8 oz)Weight with mount, flip-backs, battery
CR2032Battery
This configuration
Available in black or Flat Dark Earth (FDE); only the selected colour is supplied.
Features in practical use
Four selectable reticles
The sight offers four reticles: dot, dot with holds, circle dot and circle dot with holds. The centre dot is 2 MOA, the holds correspond to 5, 9 and 15 MOA and the outer circle to 65 MOA.
Top activation with NV override
The brightness buttons and the NV override switch sit on top of the housing. The NV button toggles between maximum brightness and the night vision setting.
12 brightness settings
Brightness can be set in 12 steps for daylight and night vision. D.A.R.C. coatings and brightness settings are designed for Gen 3+ night vision devices.
MOTAC
Motion activation switches the dot off after 120 seconds without motion and on again when movement is detected. The manufacturer states more than 50,000 hours of runtime.
Two mounting heights in the box
The sight is configured for 1.41 in (35.8 mm) absolute co-witness from the factory. A riser kit for 1.63 in (41.4 mm) lower 1/3 co-witness is included. It mounts with a half-inch hex bolt.
Flip-backs and ARD
Clear flip-back covers, an opaque front flip-back and a thread-in ARD kill flash are included.
7075-T6 aluminium housing
According to the manual the housing is milled from 7075-T6 aircraft aluminium.
IPX8 waterproof
The manufacturer lists IPX8 (up to 20 metres submersion for 2 hours); the sight is fog proof.
Available versions
Colour
Included items
- ROMEO4T-PRO 1x20 mm red dot sight
- Battery (CR2032)
- Clear flip-back lens covers
- Opaque front flip-back
- Thread-in ARD kill flash
- 1.41 in absolute co-witness mount (installed)
- 1.63 in lower 1/3 riser kit
- Optic multi-tool with Torx T10 drive bit
- Lens cloth
Matching products
With the installed M1913 mount (half-inch hex bolt, 65 in-lbf) for picatinny rails, for example on carbines. The firearm is not included.
* Firearms, mounts and other accessories shown are not included unless they are expressly listed. The selected product variant and the described scope of delivery are decisive.
Reviews
Write the first review for this item and help others make a purchase decision!
Manufacturer according to GPSR
Sig Sauer
Sig Sauer
