Medium (0.94 in)
Height 0.94 in (approx. 23.9 mm)
Technical Data
Rings · Picatinny
Sig Sauer Buckmasters Rings 1 Inch Picatinny
Rings made of 6061-T6 aluminum for riflescopes with a 1 inch main tube, for attachment to Picatinny rails, available in medium or high height.
1 in (25.4 mm)Ring diameter
medium or highHeight
6061-T6 aluminumMaterial
Picatinny (M1913)Rail
This configuration
Available in medium (0.94 in) or high (1.12 in) height; only the selected version is supplied.
Features in practical use
6061-T6 aluminum
The rings are made of an aluminum alloy that the manufacturer states is strong yet ductile enough to form around the riflescope without damaging it when properly installed.
M1913 Picatinny rail
The rings attach to M1913 Picatinny rails.
1 inch ring diameter
The rings are made for riflescopes with a 1 inch (25.4 mm) main tube.
Selectable height
The manufacturer offers three heights (low 0.85 in, medium 0.94 in, high 1.12 in), measured from the centre line of the optic to the top of the rail.
Specified torque values
The manufacturer specifies 65 in-lb (approx. 7.3 Nm) to the rail (1/2 in socket) and 25 in-lb (approx. 2.8 Nm) for the scope screws (T15 Torx).
0 MOA cant
The rings have no added cant (0 MOA).
Available versions
Height
Included items
- Ring set with two rings in the selected height
Matching products
The rings fit riflescopes with a 1 inch (25.4 mm) main tube and Picatinny (M1913) rails. Choose the height so that the objective bell and the rifle stay clear.
* Firearms, mounts and other accessories shown are not included unless they are expressly listed. The selected product variant and the described scope of delivery are decisive.
Reviews
Write the first review for this item and help others make a purchase decision!
Manufacturer according to GPSR
Sig Sauer
Sig Sauer
