Dot size
Shield specifies the dot size as 4 MOA (3.25 MOA).
Technical Data
Reflex sight · low-profile aluminium housing
SHIELD RMS2 Reflex Mini Sight 2.0 4 MOA
Low-profile aluminium reflex sight with a glass lens and 4 MOA dot, no battery drawer, 17.1 g without battery.
CR2032 · 20,000 hBattery · runtime
AluminiumHousing
No drawerBattery compartment
17.1 gWeight without battery
This version
This version has a 4 MOA (3.25 MOA) dot, a D-shaped glass lens and a matte black aluminium housing. The sight measures 40.8 x 25.35 x 22.8 mm and weighs 17.1 g without battery.
Features in practical use
Low profile for co-witness
The low profile allows co-witnessing with the standard iron sights; with Shield’s matching low-profile Glock MOS plate (not included), Shield states no suppressor-height sights are needed.
Crystal-clear glass lens
The D-shaped glass lens has an anti-reflective, colour-neutral hard coating and no filter dims the image.
Automatic brightness, new electronics
The sight adjusts its brightness itself and can therefore stay on permanently; Shield mentions revised electronics. The lowest level is night-vision compatible.
No battery drawer, CR2032
Compared with the original RMS the battery drawer is eliminated, which strengthens the housing; the CR2032 (3 V, 20,000 hours in average daylight) sits underneath and is changed with the sight removed.
Aluminium housing, SHIELD footprint
Machined from aerospace-grade aluminium and mounted on the SHIELD footprint (over 100 mounting solutions); 40.8 x 25.35 x 22.8 mm, 17.1 g without battery.
IP67, 0.9 m water depth
Shield states the sight can be immersed to 0.9 m (3 ft) for 30 minutes (IP67).
Reticle
4 MOA
Red dot of 4 MOA (3.25 MOA): the smaller of the two dot sizes covers less of the target.
Red LED
The dot is produced by a red light-emitting diode, with no laser and eye-safe.
Automatic brightness
The dot adapts to the surroundings: night-vision compatible at the lowest level, visible against the sky in bright daylight at the highest.
No click steps
Elevation and windage are set without click steps using the mini dial and hex wrench.
Scope of delivery
- Sight in the selected version
- Mini dial for adjustment
- 1 CR2032 battery
- 1 x 1° shim for additional elevation range
- 2 button head screws M4x8 mm and 2 button head screws M4x10 mm
- 1 hex wrench 1.5 mm and 1 hex wrench 2.5 mm
- 4 nylon washers 0.5 mm
- 1 battery cover (Reece’s Law)
- 2 battery stickers
- 2 Shield target stickers
- RMS2 sight cover
Matching items
Suitable mounts and adapter plates for the SHIELD footprint; Shield lists over 100 mounting solutions and a matching low-profile Glock MOS plate. The pistol and mount are not included; M4x8 and M4x10 mm screws are supplied.
Warranty
Shield provides a limited lifetime warranty on materials and workmanship for the products it designs and manufactures, valid from the date of purchase. Statutory rights remain unaffected.
* Firearms, mounts and other accessories shown are not included unless expressly listed. The selected item variant and the described scope of delivery are decisive.
Reviews
Write the first review for this item and help others make a purchase decision!
