MR
Six reticles switchable at the push of a button: 8 MOA, 8 MOA with 65 MOA ring, 8 MOA horseshoe, 8 MOA horseshoe with 65 MOA ring, 2 MOA and 2 MOA with 65 MOA ring.
Technical Data
Reflex sight · enclosed
SHIELD AMS Advanced Mini Sight
Enclosed reflex sight with co-witness capability on the SHIELD footprint, nitrogen-sealed housing and 12 brightness levels, as MR with six switchable reticles or with 4 or 8 MOA.
MR, 4 or 8 MOAReticle options
20,000 hRuntime (CR2032)
IP6830 ft (9 m), 30 min
35.9 g without batteryWeight
Versions
Available as the multi-reticle MR with six switchable reticles, or with a fixed dot of 4 MOA (3.25 MOA) or 8 MOA (6.5 MOA). Only the selected version is supplied.
Features in practical use
Large glass lens
The large, filter-free glass lens with colour-free anti-reflective coating gives a clear image; the housing is machined from aluminium.
Co-witness
The patented mechanism adjusts without click detents and, according to Shield, allows co-witnessing with standard-height iron sights.
Nitrogen-sealed, IP68
Nitrogen-sealed housing, submersible to 9 m (30 ft) for 30 minutes (IP68).
12 levels and automatic
12 manual brightness levels including 3 night-vision settings, plus 3 automatic levels; the on/off function remembers the last setting.
Side battery compartment
Side access; choose CR2025, CR2032 or CR2050 for longer runtime or a narrower, less obtrusive build. 20,000 hours in average daylight with a CR2032.
SHIELD footprint and accessories
Mounts to the SHIELD footprint (more than 100 mounting solutions). Additional interface for accessories such as a roll cage, torches, lasers, GoPro or lens covers, according to Shield.
Reticle
Reticles to choose from
Only the selected version is supplied.
4 MOA
Red dot of 4 MOA (3.25 MOA), as stated by Shield.
8 MOA
Red dot of 8 MOA (6.5 MOA), as stated by Shield.
Scope of delivery
- SHIELD AMS sight in the selected version
- Mini dial with 1.5 mm hex wrench (for zeroing)
- Battery cap covers for CR2025, CR2032 and CR2050
- Battery cap removal tool
- CR2032 battery
- AMS cover
- 1° shim
- 2.5 mm hex wrench for the mounting screws
- 2 button head M4x8 mm screws
- 2 button head M4x10 mm screws
- 4 nylon washers 0.5 mm
- 1 battery cover (Reece’s Law)
- 2 battery stickers
- 2 SHIELD target stickers
Matching items
Mounts to the SHIELD footprint, directly on slides cut for it or with a mounting plate; the firearm and mount are not included. According to the Shield FAQ, the footprint does not fit RMR cuts; Shield offers adapter plates for that.
Warranty
Shield gives a limited lifetime warranty on materials and workmanship for products it designs and manufactures itself, valid from the moment of purchase; statutory rights remain unaffected.
* Firearms, mounts and other accessories shown are not included unless expressly listed. The selected item variant and the described scope of delivery are decisive.
Reviews
Write the first review for this item and help others make a purchase decision!
