SAFARILAND® COMP III Speedloader (Jetloader)
available in 2 sizes:
Size 1 for L-frame version suitable for
S&W models 581, 586, 681, 686 as well as Ruger GP 100
size 2 for K-frame version suitable for
S&W models 10, 12, 13, 14, 15, 19, 64, 65, 66, 67, 68 as well as for Dan Wesson .38 / .357
Perfect competition speedloader - for fastest loading - proven in countless competitions.
The operation is easy and uncomplicated.
1) Load Speedloader
Hold the speedloader with the opening facing upwards on the outer ring or place it on a firm surface. Place cartridges of the correct caliber, case first, in the opening provided (cartridges must be of the same length and caliber).
The cartridges are then fixed in the speedloader. Press the fixing aid (e.g. a beer mat) against the cartridge heads. Turn the speedloader over together with the fixing aid and press it against a hard, flat surface.
With one hand, press the cover sleeve over the large spring completely down against the resistance of the spring. With two of the 3 fingers of the other hand, turn the knob at the end of the speedloader clockwise until a click is heard (approximately 1/6 turn). The cartridges are now fixed in the speedloader.
The spring-loaded activation bolt, which is centered between the cartridges, has thus been activated/tensioned and secured by the rotation.
2) Using the loaded speeloader or loading the revolver:
Fix the opened, empty barrel of the revolver with one hand. Guide the speedloader from above against the drum and bring the cartridges into the same position as the empty chambers. While holding the speedloader by the cover sleeve, now forcefully push the cartridges down into the drum.
DO NOT PLACE AND/OR PRESS YOUR THUMB ON THE END BUTTON OF THE SPEEDLOADER!
Pressing in makes contact between the activation bolt and the drum.
This releases the lock and the cartridges automatically and reliably slide into the chamber. It is not possible for the cartridges to get caught in the speedloader.
The drum can be closed.
The Safariland® Comp III Speedloader (Jetloader) was manufactured using the plastic injection molding process and the spring-assisted release button ensures the fastest and most reliable reloading.
This makes it especially perfect for all types of competitions.
Item no.: SLJ-GL8S / EAN: 0781602158046
