Technical Data
Product Information
| Item information | Value |
|---|---|
| HAN: | MATE LITE L38 |
| Category: | OPTICS |
Thermal clip-on · Mate series
Nocpix Mate Lite L38 Thermal Clip-On
Thermal clip-on with 384 × 288 pixels and a 38 mm objective lens, mounted in front of the day scope or usable as a monocular; without a built-in rangefinder.
Product
The Mate Lite L38 is the Mate model with the 384 × 288 detector and the 38 mm objective lens. It has no built-in rangefinder and no Magic Zoom. It weighs 399 g with battery and measures 115 × 72 × 76 mm; the protection rating is IP67. A day scope, an adapter and a rifle are not included. Application photos show devices of the series and are examples.
Features in practical use
Thermal sensor
The detector has 384 × 288 pixels at 12 µm pixel pitch, a NETD of 15 mK or less and a 60 Hz frame rate; the device works shutterless.
38 mm F1.0 objective
The objective lens is focused with the lens focus ring; Nocpix states a detection range of 1,950 m for a target of 1.7 m × 0.5 m at P(n) = 99%.
Field of view and display
The field of view is 6.9° × 5.2° (12.3 m × 9.2 m at 100 m); the 0.49 inch AMOLED display shows 1920 × 1080 pixels, eye relief 20 mm, exit pupil 35 mm.
App, memory and N-Link
Wi-Fi and the Nocpix app, 64 GB internal memory for photo and video, recoil activated video and remote control; N-Link pairs two Nocpix devices to exchange distance data.
Clip-on with UI zoom
Adapter interface M52 × 0.75; to adapt to day scopes with different magnification the device offers four UI levels, switched with a short press of the down button.
Replaceable 18650 battery
Operating time up to 6 hours at 22 °C (depending on Wi-Fi); charging in the charger or via Type-C at 5 V; a built-in battery pack that cannot be removed is also fitted.
Scope of delivery
- Mate series thermal imaging attachment
- Remote control accessories
- 2 × 18650 battery
- Battery charger
- Type-C cable
- 10 heated zeroing targets
- Lens cloth
- Quick start guide
- Portable bag
Matching items
The device is mounted in front of the objective lens of a day scope. For mounting in front of the day scope Nocpix names a suitable adapter with an M52 × 0.75 internal thread, which is available separately and not included; it is chosen according to the outer diameter of the day scope's objective lens. The day scope must be zeroed before mounting. Day scope, adapter and rifle are not included.
* Firearms, mounts and other accessories shown are not included unless expressly listed. The selected item variant and the described scope of delivery are decisive.
