Automatic shut-off
Without operation the illumination switches off after 3 hours. To switch it back on, turn briefly to position 0 and select the desired brightness.
Riflescope · second focal plane
2.5–20x50 hunting riflescope for near and very distant targets with iControl™ G4i Fiber illuminated reticle and parallax compensation from 10 m.

This version has the G4i Fiber reticle in the second focal plane and is mounted with rings on the 30 mm centre tube. Only the selected version is supplied.
iControl™ illumination control
The reticle is controlled by the iControl™ electronics. Brightness is set on the illumination knob (positions 2 to 8, 0 = off).
Without operation the illumination switches off after 3 hours. To switch it back on, turn briefly to position 0 and select the desired brightness.
If the scope is tilted more than 30° to the side, the dot switches off after 3 minutes, beyond 50° immediately, for example when the rifle is laid down in a high seat.
From 50° upwards or downwards the dot switches off after 3 minutes, beyond 70° immediately. Back in the normal position it returns instantly at the brightness set before.
At 15 % remaining capacity the electronics warn in good time. The angle sensors can be deactivated if required; power comes from a CR2032 coin cell.
2.5x to 20x magnification: a 16.4 m field of view at 100 m at 2.5x for near targets, 2 m at 20x for observing and identifying at long range.
Generous eye relief and an exit pupil of 8.5 to 2.5 mm for quick sight acquisition and safety when firing.
Adjustment turrets with 0.1 mrad per click (equal to 1 cm at 100 m) and 320 cm of travel each at 100 m; the zero point is set without tools.
Parallax setting from 10 m to infinity for a sharp image and reticle on near and very distant targets.
HD lens system for resolution, colour rendition and edge sharpness at 87 % transmission to ISO 14490-5.
367 mm long, 50 mm objective; the 30 mm centre tube fits a wide choice of rings and mounts. Diopter adjustment from −3 to +2 dpt.
Reticle
Reticle with an illuminated dot in fibre technology (made in Germany): clearly defined, bright and fine.

Dot 0.5 cm, line width 0.6 cm at 100 m at 20x magnification.
100 cm remain open horizontally between the bar ends; the lower bar starts 50 cm below the centre.
The 3 cm outer bars guide the eye to the centre even at dusk.
The fibre dot is clearly defined and bright; GPO describes it as suitable for all lighting situations.

Coverage in cm at 100 m at 20x magnification. As a second-focal-plane reticle, it covers correspondingly more at lower magnification.
Suitable 30 mm rings or mounts; mounting height and rail system of the rifle are to be chosen separately. A mount is not included.
GPO grants a 10-year manufacturer's warranty on optics and mechanics and 2 years on electronic components; statutory rights remain unaffected. Developed and designed by GPO in Germany, electronics made in Germany, final assembly within the GPO production network, 100 % quality control and packaging in Germany.
* Firearms, mounts and other accessories shown are not included unless expressly listed. The selected item variant and the described scope of delivery are decisive.
Add product directly to the cart:
You can search by item no. or EAN/GTIN to quickly add the product to the cart.

We help and advise you in all matters