BIANCHI® B12 - Reversible Fancy Stitched Belt, 1.5" (38mm)
The B12 fancy stitched belt features cross over stitching throughout the length of the belt. It is made of premium, full-grain cowhide, oil-tanned, and hand-rubbed to a lustrous finish. Natural oil finish on one side, suede on the other. Plain finish, tan or black; 1.5" (38mm), 32" - 46" (81 cm-117 cm).
The belt can be worn on either side, with the smooth or rough side facing out. Turning is self-manageable with a simple conversion, no tools required.
To change from the smooth to the rough outer surface, simply open the press studs, slide the end keeper to the side and remove the belt buckle. Place the belt with the rough side facing upwards and completely unfolded, place the buckle with the rounded side and the spike pointing upwards on the beginning of the belt (on the side where the press studs are located), push the belt between the spike and the buckle until the spike can be inserted into the hole provided, after folding over the short end, place the end keeper between the press studs and close the press studs again.
To change from the rough to the smooth outer surface, simply open the press studs, push the endkeeper aside and remove the belt buckle. Then lay the belt down with the smooth side up and completely unfolded, slide the buckle under the belt (on the side where the press studs are) with the rounded side and the spike pointing upwards and bring the spike up into the hole provided. After folding over the short end, place the end keeper between the press studs and close the press studs again.
- Belt width is approx. 38 mm (1.5")
- brown with brass buckle
- black with chrome buckle
- Sizes: 32 (76 cm) to 46 (122 cm)
- Material: genuine leather
- Manufacturer: BIANCHI®
Important: The cm measurements for the sizes refer to the waist or hip circumference (depending on where the belt is worn, this should also be measured), NOT to the belt length of a belt! Measure where you want the new belt to sit. The length from the beginning of the belt buckle to the middle hole is decisive.
